Shanghai Shengchen Precision Sheet Metal Co., Ltd.
Landline:86-21-69785175
86-21–69785171
Fax: 86-21-69785173
Mailbox: [email protected]
Website: www.chef-dad.com
Address: No. 1588, Huazhi Road, Huaxin Town, Qingpu District, Shanghai
Shanghai sheet metal processing requirements Daquan:
1. Parts remove oxide scale.
2. There should be no scratches, scratches, etc. on the surface of the part to damage the surface of the part.
3. Remove the burr flash.
4. After quenching and tempering treatment, 28HRC~32HRC.
5. The parts are subjected to high frequency quenching, tempered at 350~370 °C, 40HRC~45HRC.
6. Carburizing depth 0.3mm
7. Perform high temperature aging treatment.
8. Unfilled shape tolerances shall comply with GB1184-2000.
9. Unmarked dimensional tolerances should be in accordance with BG/T1804-m
10. The casting tolerance band is symmetrical to the basic size configuration of the blank casting
11. Unfilled radius R5
12. The uninterrupted angle is 2 × 45 ° C
13. The sharp angle is blunt.
Landline:86-21-69785175
86-21–69785171
Fax: 86-21-69785173
Mailbox: [email protected]
Website: www.chef-dad.com
Address: No. 1588, Huazhi Road, Huaxin Town, Qingpu District, Shanghai